Premium Stations
DDSD
2-Tool Rework Station with DT530
DDSD Station Station provides a versatile solution for SMD and high-power applications, excelling in desoldering through-hole components and removing excess solder after SMD removal. It is ideal for delivering clean, precise results across various soldering tasks.
It provides the best rework quality thanks to JBC Most Efficient Soldering System, with Intelligent Heat Management to extend tip life and reduce energy consumption.
Includes:
- DDE 2-Tool Control Unit managing up to two tools simultaneously and fully compatible with 10 different JBC Tools, delivering up to 150 W per tool.
- T245 General Purpose Handle which works with C245 Cartridge Range.
- DT530 Angled Desoldering Iron which works with D530 Tip Range.
- MSE Electric Desoldering Module provides exceptional suction power, reaching up to 85% vacuum, ensuring precise and efficient solder removal.
References
DDSD-1QA
120 V
DDSD-2QA
230 V
DDSD-9QA
100 V
Product composition
1 DDE 2-Tool Control Unit
1 MSE Electric Desoldering Module for DDE & DME
1 T245 General Purpose Handle (cartridge not included)
1 DT530 Angled Desoldering Iron (D530003 already inserted)
1 ADS Stand for T210 & T245
1 DTS Stand for DT530
1 SCH Cartridge Holder
Specifications
Nominal Power
370 W
Peak power (tool)
150 W – 23.5 V
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Idle temp. stability (still air)
±1.5ºC / ±3ºF / Meets and exceeds IPC J-STD-001F
Vacuum
85 % / 640 mmHg / 25.4 inHg
Flow rate
35 SLPM
Temp accuracy
±3% ( using reference cartridge)
Temp adjustment
±50ºC / ±90ºF Through station menu setting
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS
USB-A (front)
Firmware update, Graphics and profiles
USB-B (rear)
PC communications
FAE / Robot connector
Remote control or FAE Fume Extractor connection
ESD safe
Meet ANSI/ESD S20.20-2021
WEIGHT AND DIMENSIONS
Control Unit
232 x 148 x 120 mm / 8.96 kg.
Package
495 x 415 x 395 mm / 12.04 kg.
PDF印刷
