Premium Stations
HDEK
Heavy Duty Rework Station

HDEK Heavy Duty Rework Station has been designed to reduce the soldering time in applications that require a large amount of heatspan.

Some examples of applications are: coaxial cable shields soldering in telecommunication antennas, soldering of large copper conductors in medical imaging scanners, battery terminals, large-size capacitors, etc.

This station is supplied with 2 HDE Control Units, the most powerful soldering unit in the JBC range, and with HT470 HD Thermal Tweezers which use C470 Cartridge Range.

The Control Unit provides the best soldering quality thanks to JBC Exclusive Heating System and, additionally, the intelligent Sleep & Hibernation Modes help to extend life of tips. It also allows direct connection with JBC Fume Extractors.

Aditionally, includes SCH Cartridge Holder to store up to 16 cartridges and tips nearby.


DON’T BELIEVE US
TRY IT!
References
HDE-2KE
230 V
HDE-1KE
120 V
HDE-9KE
100 V
Product composition
 
2
HDU
Heavy Duty Control Unit
 
1
HT470
Heavy Duty Thermal Tweezers
 
1
HDTS
Stand for HT470
 
1
SCH
Cartridge Holder
 
Dimensions
232.00 × 148.00 × 128.00 cm
Specifications
Selectable Temperature
90 to 500 ºC / 190 to 932 ºF
Idle temp. stability (still air)
±1.5ºC (±3ºF)
Meets and exceed IPC J-STD-001F
Temp accuracy
±3% ( using reference cartridge)
Temp adjustment
±50ºC (±90ºF) Through station menu setting
Connectivity
USB-B (rear)
Software PC / Traceability
USB-A (front)
Firmware update Soldering Graphics management
RJ12 Connector
ESD/EOS
Tip to ground vol./ resist.
Meets and exceed
ANSI/ESD S20.20-2014 IPC J-STD-001F
Power supply
Peak power
250 W - 42 V
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
Premium Stations
232 x 148 x 128 mm / 7.27 kg.
9.13 x 5.83 x 5.04 in / 16.02 lb.
Package
620 x 385 x 395 mm / 9.68 kg.
24.41 x 15.16 x 15.55 in / 21.33 lb.
 PDF印刷