Modular System
MVE
Pneumatic Desoldering Module for DDE & DME
Clean and dry compressed air is required.
The Pneumatic Desoldering Module is indispensable for a complete desoldering process.
By using compressed air and a Venturi valve, the system provides the best results due to its instantaneous vacuum ramp.
It is supplied with easy-to-change filters for extending the pump´s life.
The MVE can be joined to any port of the DDE & DME control units and has the possibility to be controlled by the P-005 Pedal.
It works with the comfortable DS360 or DR560 desoldering irons and their corresponding tips.
References
MVE-A
Pneumatic Desoldering Module for DDE & DME
Product composition
1
MVE
Pneumatic Desoldering Module for DDE & DME
Specifications
Air pressure
4 - 6 Bar
Vacuum (at 6 bar)
90% / 680mmHg / 26.8inHg
Flow rate
15 SLPM
Ambient operating temp.
10-40 ºC / 50-104 ºF
Pedal conection
ESD safe
Dimensions and weight
Control Unit
225 x 145 x 55 mm / 0.70 kg.
8.86 x 5.71 x 2.17 in / 1.54 lb.
Package
280 x 195 x 115 mm / 1.00 kg.
11.02 x 7.68 x 4.53 in / 2.20 lb.
PDF印刷
