Modular System
MN
Nitrogen Flow Regulator for DI
Nitrogen improves the quality of any solder joint as it provides extra heat and helps prevent oxidation during soldering processes.
MN regulates nitrogen flow to the soldering tip in order to optimize consumption.
It automatically activates the flow when you remove Nitrogen Handle (T210N or T245N) from the stand. The flow stops when the handle is placed back and the tip temperature drops to the sleep temperature.
It requires GN Nitrogen Generator or an available nitrogen supply at the operator´s bench.
MN works with DI Control Unit and the discontinued DD or DM Control Units.
References
MN-A
Nitrogen Flow Regulator for DI
Product composition
1
MN
Nitrogen Flow Regulator for DI
Specifications
Net weight
1,14 kg (2.52lb)
Size
50x120x130 mm
0.20 x 0.47 x 5.12 in
Voltage
24V (from control unit)
Power
3W
N2 flow regulation
0,5 - 3,5 SLPM (5 Bar)
Max. pressure
6 Bar
Ambient operating temp.
10-40 ºC / 50-104 ºF
ESD safe
Dimensions and weight
Control Unit
155 x 50 x 119 mm / 1.14 kg.
6.10 x 1.97 x 4.69 in / 2.52 lb.
Package
243 x 75 x 115 mm / 1.30 kg.
9.57 x 2.95 x 4.53 in / 2.86 lb.
PDF印刷
